ECM Stainless Steel Multi-stage Centrifugal Pumps



  • Water treatment processes
  • Industrial cleaners and dishwashers
  • Pressure boosting systems
  • Heating and cooling for industrial processes
  • Air-conditioning systems, Air freshening,heater devices.
  • Water supply and boosting(drinking water with light chlorinated water)
  • Fertilization systems
  • Domestic and household use


  • Water delivery or circulation for machinery or air conditioning equipment.

ECM Actual Insallation Site

  • Water transfer to the water storage tank on top floor of the building.

ECM Actual Insallation Site

  • As the main pump of inverter (VFD) constant pressure pump system. Automatically increase water pressure in your home, building, apartment and more.

ECM Actual Insallation Site

ECM Actual Insallation Site


Proper Installation way- Water level in Cistern is above the pump inlet end, Positive water pressure comes.

ECM Installation way

Note: If water source(Cistern) is under the pump-1. The bottom foot valve installed on suction pipe is necessary. 2. Suction lift can't be more than 3M. 3. Priming water inside the pump full before starting.


  • For clean, non-flammable and non-explosive liquid without solid granules and fibers;
  • Mineral water, soft water, pure water, edible vegetable oil and other light chemical mediums.
  • When the liquid density or viscosity is larger than normal water, it is necessary to select a motor withhigher power.
  • Whether a specific liquid is suitable for the pump, it all depends on many factors, among which the most important ones are chlorine content, PH value, temperature, solvent and oil content.


  • Liquid temperature: Standard type -15 °C~70 °C
    Hot water type :-15 °C~100 °C (Customized)
  • Ambient temperature: Max.40°C
  • Working pressure: Max. 10 bar.
  • Suitable for transport clean water, without solid particles or non-corrosive fluids.


  • Output: 0.5HP~5.5HP(0.37KW~4KW)
  • Motor Protection: IP55
  • Motor Insulation: F
  • IE2 High efficiency motor.(IE3 is available upon special request)
  • Pole: 2P
  • Voltage:
    1phase 110;220V*60Hz(below 3HP); 3phase 220/380*60Hz
    1phase 220~240V*50Hz(below 3HP); 3phase 380~415V*50Hz
  • Inlet/Outlet: 1"~2"
  • Max. Head: 76M
  • Max. Capacity: 550LPM
Any questions about our products?

The EVERGUSH branch offices cover all round Taiwan. If you have any questions about our products or need related technical data, please feel free to contact with EVERGUSH local branch office. Please link our branch office as following.

Equipment failure? Try our online troubleshooting.
Right here we will provide solutions for problems or failures that you could've encountered with pumps. The content of these solutions have been gathered from experienced and professional technicians in our company. Before you contact our technicians for answers, we suggest you read through below basic troubleshooting and instruction manual. It should help you to understand more about our products, and also find out the solutions more quickly.