Skip to main content

EF4 Submersible Sewage Pumps(4 Pole)

  • EF4 Series
    Submersible Sewage Pump (4 Pole Motor)
  • EF4 Series
    Submersible Sewage Pump (4 Pole Motor)
  • EF4 (15~30HP)
    Submersible Sewage Pump (4 Pole Motor)
  • TOS-EF4 (Optional)
    Submersible Sewage Pump (4 Pole) With Guide Rail device
  • EFS4 Series (Customized)
    Stainless Steel SUS316 Submersible Sewage Pump (4 Pole Motor)
  • EFS4 Series (15~30HP/Customized)
    Stainless Steel SUS316 Submersible Sewage Pump (4 Pole Motor)


    Features

    1. Sub. Sewage pump with 4 Pole motor. Large capacity, Variety of specifications. It can be used for long-term continuous duty.  
    2. EF4 is cast iron submersible sewage pump(with 4Pole motor).
    3. EFS4 is stainless steel SUS316 submersible sewage pump(with 4Pole motor).The performance is the same with EF4, only material is different.The main parts are made of stainless steel 316 to reduce the abrasion from sewage and waste water.
    4. Non-clogging impeller, minimized abrasive wear,large impeller clearance, and maintenance free.
    5. Pump is equipped with motor overload protector,it will shut off automatically to prevent motor from burnout whenever its voltage drop, impeller plugged, and other unusual conditions.
    6. The mechanical seal part combines with superb double set mechanical seals. You can choose more wear-resistant silicon carbide (SIC) mechanical seals to cope with harsher wastewater conditions.
    7. Auto float switch is optional, to operate submersible pumps automatically.The Float switch needs to be connected to the control panel.

    Applications

    1. Building waste water treatment system, sewage treatment plant, community market.
    2. Drainage waste water from industry and factory.
    3. Fishery, animal husbandry, dairy farm, piggery,fecal sewage tank.
    4. Other sewage or sump treatment system.
    5. Heavy-duty Waste water treatment.

    Operating Conditions

    1. Ambient Temperature: Max.40℃
    2. Liquid Temperature: 0~40℃
    3. 24-hour continuous operation is prohibited.
    4. No use in sea water.
    5. Solid passage: 40~60 MM

    Specifications

    1. Power: 3HP~30HP (2.2KW~22KW)
    2. Starting Method:  Direct Start: 3~10HP ; Y-Delta:15~30HP
    3. Motor: IP68 / Insulation F
    4. Voltage:
      3Phase 220V/380V/415V/440V/760V (For All models)
    5. Pole: Only 4P
    6. Frequency: 50Hz or 60Hz
    7. Max. Head: 30M(50HZ) / 36M(60HZ)
    8. Max. Capacity: 390M³/Hr (6,500 LPM)

    Diagram of Sub. Sewage Pump with float switch

    A. Connect Float switch on control panel, to run the pump automatically.

    • You can choose a customized EVERGUSH control panel for EVERGUSH wastewater pumps. Panel is connected with some float switches to allow the pump system to automatically drain and shut down.You can choose a single pump to operate alone or two units (multiple units) to alternately operate in parallel. The outer box has a single door or double door(with window) choice, steel plate or stainless steel material, direct start or Y-delta start or Soft Starter control. EVERGUSH control panel is customized and designed to meet the on-site environment and regulatory requirements.

    Diagram of Submersible Sewage Pump with TOS Guide Rail Device

    • Through simple and convenient installation, we can connect the pump onto guide rail device. Whenever the pump needs maintenance, it can be easily pulled out through guide bar to dismantle, repair or examine the pump. Because wastewater pits or septic tanks could contain deadly biogas(methane) and the environment is always extremely harsh.For Life safety purpose, The workers no longer take big risks to go down the septic tank to do maintenance or replacement. It's safer and more convenient to do maintenance for the pump.

    Copyright@Asia Automatic Pump Co.,Ltd.All rights reserved.
    Powered by ASIA AUTOMATIC PUMP CO.,LTD.