ST/BS/BC Stainless Steel Submersible Deep Well Pump

There are two different types of deep well pumps, one is oil immerse type, another is water immerse type.
Internal parts (wet parts) in contact with the liquid is designed in stainless steel (SUS304), multistage impeller design, broad range of head.
Franklin motor is available upon customer's request.
Special design of durable stainless steel and guide impeller to prevent from abrasion of sand and water with abrasives.
Enclosed type motor, better cooling effect and motor efficiency.

Step 1: When it’s newly installed, discharge the muddy water from the underground until it runs clearer before connecting the piping.

Step 2: Connect the power box and set up the initial piping for testing.

Step 3: The power box is fully set up, and the piping is connected properly.

Step 4: Complete installation and testing.

For multi-storey buildings, apartments and factories pressure boosting use. Set up in basement in a water storage tank.
Agriculture irrigation.
Delivering groundwater from deep well,river,hot spring,lake.
Motor start-up method:
1. Direct start-up:0.5HP-10HP
2. Y- △ start-up:15HP-120HP

Irrigation spraying for farmland.

Spraying for landscaping and gardening.

Spraying water on the grass in the park or farm.

Liquid temperature: Standard type:1~35℃
Ambient temperature: Max. 40℃
Working pressure: Max.40 kg/cm²
Well Diameter: 4”,6”,8”,10”,12”
Suitable for transport clean water, ground water, deep well water without non-corrosive fluids.

Power: 0.5HP~120HP (0.75KW~110KW)
Motor: IP68 / Insulation F
Water Immerse type or Oil Immerse type.
1Phase 220V/240V (1HP~3HP) 3Phase 220V/380V/415V/440V
Single phase motor built in thermal overload protector.
Speed: 2950rpm/3550rpm
Frequency: 50Hz/60Hz
Max. Head: 460M
Max. Capacity: 300M³/Hr (5000 LPM)