Skip to main content

EXL Submersible Axial Flow Pumps

  • EXL / 4P
    Submersible Axial-Flow Pump
  • EXL / 4P
    Submersible Axial-Flow Pump
  • Propeller Impeller(Bronze)
    For EXL Models
    EXLS Submersible Axial Flow Pump Brochure (50HZ)
    EXLS Submersible Axial Flow Pump Brochure (60HZ)
    EXL Submersible Axial Flow Pump Brochure(50Hz)
    EXL Submersible Axial Flow Pump Brochure(60Hz)
    EXL Submersible Axial Flow Pumps Instruction Manual

    Features

    1. Large flow capacities achieved with almost no vibration or noise by use of Axial & Mix Flow design.
    2. Easy handling, energy saving and low maintenance.
    3. Robust structure and compact design with a oil motor, double mechanical seals and Axial-flow impeller with flow guide vane for high efficiency.
    4. Pump manufactured with heavy duty housing,cable leads are isolated by hardened epoxy for water proofing.
    5. Impeller made of Bronze has a great abrasion and corrosion resistance.
    6. EXL is suitable to transfer water below 5 meter head, large flow demand application.
    7. EXLS is suitable to transfer water above 5 meter head, large flow demand application.

    Main Structure

    Applications

    1. Water extracting from streams, lakes, reservoirs,channel water, fishy pond.
    2. Water supply and circulation for landscape and water features.
    3. Aquaculture and agriculture water pumping and drainage for large volume water applications.
    4. Flood control,Pumping Station.

    Operating Conditions

    1. Ambient Temperature: Max.40℃
    2. Liquid Temperature: 0~40℃
    3. Depth: Max.10M
    4. Solid Passages: 23MM.
    5. Working Pressure: Max.3bar.

    Specifications

    1. Power(Output): 5HP~20HP
    2. Protection: IP68
    3. Insulation: F
    4. Pole: 4P
    5. Voltage:
      3phase 220 or 380V*60Hz
      3phase 380~415V*50Hz
    6. Discharge: 6”~12”
    7. Max.Head: 20M
    8. Max. Capacity: 11000 LPM ( 660M³/Hr)

    Explanation of the picture

    • Drain water from the first tank to the second tank, then clean the first tank. After cleaning the first tank, refill it with new water.
    • If the tank (for aquaculture) becomes too full, the excess water flows through the overflow pipe to the filter tank, and then EXL pump drains water from the filter tank into the drainage ditch.

    Copyright@Asia Automatic Pump Co.,Ltd.All rights reserved.
    Powered by ASIA AUTOMATIC PUMP CO.,LTD.