Skip to main content

EF Submersible Sewage Pumps

  • 0.5HP
    Direct Type
  • 1HP
    Direct Type
  • 2~3HP
    Direct Type
  • 2~3HP
    Elbow Type (Detachable Elbow)
  • 5~7.5HP
    Elbow Type (Detachable Elbow)
  • 10~15HP
    Elbow Type (Detachable Elbow)
    • Non-Clog Vortex Impeller
      For EF Model
    • EF-A With Float Switch
      0.5~2HP Single Phase
    • EF-VA With Vertical Float Switch
      0.5~2HP Single Phase / For Narrow Space
    • TOS-EF (0.5~1HP)
      EF Pump With Guide Rail Device
    • TOS-EF (0.5~3HP)
      EF Pump With Guide Rail Device
    • TOS-EF (5~7.5HP)
      EF Pump With Guide Rail Device
      EF Submersible Sewage Pump Brochure(50Hz)
      EF Submersible Sewage Pump Brochure (60Hz)
      EF Submersible Sewage Pump Instruction Manual

      Features

      1. Non-clogging impeller, minimized abrasive wear,large impeller clearance, and maintenance free.
      2. Pump is equipped with motor overload protector,it will shut off automatically to prevent motor from burnout whenever its voltage drop, impeller plugged, and other unusual conditions.
      3. The mechanical seal part combines with superb double set mechanical seals, and can select SIC carbon steel mechanical seal.
      4. Auto float switch is optional, to operate submersible pumps automatically.

        Structure

        Exploded View

        Applications

        1. Building waste water treatment system, sewage treatment plant, community market.
        2. Drainage waste water from industry and factory.
        3. Fishery, animal husbandry, dairy farm, piggery,fecal sewage tank.
        4. Other sewage or sump treatment system.

        Operating Conditions

        1. Ambinent Temperature: Max.40℃
        2. Liquid Teperature: 0~40℃
        3. Surbmergence: Max. 10M
        4. No 24 hrs continously operation
        5. No use in sea water or highly corrosive liquids.
        6. Solid passage: 35~50MM

        Specifications

        1. Power: 0.5HP~15HP (0.37KW~11KW)
        2. Motor: IP68 / Insulation F
        3. Voltage:
          1Phase 110/220~240V (1/2HP~2HP)
          3Phase 220V/380V/415V/440V)(All models)
        4. Pole: Only 2P
        5. Frequency: 50Hz/60Hz
        6. Max. Head: 34M(50HZ) / 40M(60HZ)
        7. Max. Capacity: 150M³/Hr (2,500 LPM)

        Diagram of Sub. Sewage Pump with float switch

        Dry-running or low water level running is forbidden for submersible sewage pump,It could cause damage on mechanical seal and motor coils. To avoid this situation, installer can connect float switch on control panel, to make sub.pump on & off automatically.Single phase sub. pump can be equipped with float switch directly upon request.

        A. Single Phase Submersible Pump(0.5~2HP)can be equipped with float switch on pump.

        • The float switch control automatically starts the pump at a high water level to drain and prevent sewage overflow. It stops at a low water level to avoid running the pump without water, which could cause the motor coils to overheat and get damaged.
        • EVERGUSH submersible sewage pump is equipped with a float switch and is installed in the sewage well or wastewater pit to automatically drainage waste water.

        B. Connect Float switch on control panel, to run the pump automatically(For both 1 and 3 phase models).

        • You can choose a customized EVERGUSH control panel for EVERGUSH wastewater pumps. Panel is connected with some float switches to allow the pump system to automatically drain and shut down.You can choose a single pump to operate alone or two units (multiple units) to alternately operate in parallel. The outer box has a single door or double door(with window) choice, steel plate or stainless steel material, direct start or Y-delta start or Soft Starter control. EVERGUSH control panel is customized and designed to meet the on-site environment and regulatory requirements.

        Diagram of Submersible Sewage Pump with TOS Guide Rail Device

        • Through simple and convenient installation, we can connect the pump onto guide rail device. Whenever the pump needs maintenance, it can be easily pulled out through guide bar to dismantle, repair or examine the pump. Because wastewater pits or septic tanks could contain deadly biogas(methane) and the environment is always extremely harsh.For Life safety purpose, The workers no longer take big risks to go down the septic tank to do maintenance or replacement. It's safer and more convenient to do maintenance for the pump.
        • The length of the guide rail(bar) is determined according to site conditions. The installer can purchase guide bars at local hardware stores.

        Copyright@Asia Automatic Pump Co.,Ltd.All rights reserved.
        Powered by ASIA AUTOMATIC PUMP CO.,LTD.