1. Let water continue flowing in the wastewater pool(tank), to avoid becoming a stagnant pool(tank).
2. To avoid too much solid particles or dirt precipitation.The propeller of the mixer rotates continuously to achieve the effect of stirring and dispersing the waste water and prevent solid particles from settling under the tank.

Through simple and convenient installation, we can connect the Mixer onto guide rail device. Whenever the mixer is needed for maintenance, it can be easily pulled out through guide rail, then we can dismantle, repair or examine the mixer. For safety purpose, The workers no longer need to go down the septic tank to do maintenance, and it saves time.Another advantage is that the submersible mixer can be fixed by a fixed seat to reduce the vibration of the mixer during operation.The length of the square guide rail is determined according to the installation site. Installers will need to purchase suitable square rails from a local hardware store and determine the required length.

• EFM: Most of main wetted parts are cast iron and SUS304 material.Mix impeller(Propeller) is Cast iron FCD450 material.
• EFMS: Most of main wetted parts are SUS316 material. Mix impeller(Propeller) is Stainless Steel SUS316 material.
• The original EFM cast iron mixer impeller(propeller) can be replaced with SUS316 material upon special request.The impeller is the main consumable after a period of use.If the use environment is very harsh, the impeller is more likely to be damaged in a short time.In order to extend the service time and reduce the consumables, it is better to replace the original cast iron impeller with SUS316 material impeller.
• With an easy and convenient installation, we can connect the mixer to the guide rail device. When maintenance is needed, the mixer can be easily pulled out using guide rods for disassembly, repair, or inspection. For safety, maintenance workers no longer need to enter the septic tank, saving time and ensuring safety. Another benefit is that the submersible mixer can be secured with a mounting bracket to reduce vibrations during operation. The length of the square guide rod(rail) is determined by the installation site. Installers need to purchase the appropriate square guide rod(rail) from local hardware suppliers and ensure the required length. (Square guide rod dimensions: 50mm x 50mm x 2.0mm thick x required length M).

1. Ambient Temperature: Max.40℃
2. Liquid Temperature: 1~40℃
3. 24 Hours continuous operation is allowed.