US Inverter-controlled Booster Pump System(Simplex)

US50-CP50 (2~3HP)

CP Centrifugal Pump / 60L Pressure Tank / 2"
US80-CP80 (5~7.5HP)

CP Centrifugal Pump / 60L Pressure Tank / 3"
US50-CPS(2~3HP) Customized

CPS SUS Centrifugal Pump/SUS Pipe/60L Tank/2"
US80-CPS (5~10HP) Customized

CPS SUS Centrifugal Pump/SUS Pipe/60L Tank/3"
US50-ECM8/12 (2~3HP)

ECM SUS Multi-stage Pump/20L Tank/1.5"~2"
US50-ECM8/12 (2~5HP)

ECM SUS Multi-stage Pump/60L Tank/1.5"~2"
US50-ECM8/12 Customized

ECM Multi-stage Pump/SUS Pipe/20L Tank/1.5"~2"
US40/50-SQD (1~2HP)

SQD Self-priming Pump/20L Tank/1.5"~2"
US80-SQD (3~5HP)

SQD Self-priming Pump/60L Tank/3"

US50-ECDL (1~10HP)

ECDL Vertical Multi-stage Pump/50L Tank/2"
US50-ECDL / With Motor Cover

ECDL Vertical Multi-stage Pump/100L Tank/2"
US50-ECDL (1~10HP)

ECDL Vertical Multi-stage Pump/60L Tank/2"
US40/50-ECDL (1~5HP)

ECDL Vertical Multi-stage Pump/20L Tank/2"
US40/50-ETS / Customized

ETS Vertical In-line Pump/8L Tank/1.5"~2"
US40/50-STU / Customized

STU Sub. Transfer Pump/60L Tank/1.5"~2"
US40/50-BS/BC / Customized

BS/BC Sub. Well Pump/100L Tank/1.5"~2"

US Inverter Control Booster Pump System Brochure (60HZ)

Features

It will not have unstable water pressure. The water pressure will stay constant all the time. It improves the drawback that differential pressure controller would cause. It will not cause water hammer effect due to old pipeline structure. You can set up whatever pressure is necessary for the sites.
Low and smooth operating noise. It will adjust motor speed and frequency according to current demand for water. It will save electricity and maintain longer life expectancy for the pump.
Customized design for customers if they want to choose different bladder capacities, pump models, inverters or pump quantities for alternate or parallel operations.
Silent operation and constant pressure.
Easy installation without cooling tower. You don't have to worry about periodic maintenance for cooling tower.
Adopting high quality "Delta" inverter and "Danfoss" pressure transmitter that provide better stability for the system.
It will automatic switch off within 20 seconds for dry-running situation. The motor will not burn out easily. If dry-running incident occurs, it will auto re-start every 20 minutes until the water source is completely back to normal.(You can adjust automatic reset timing according to your needs.)
Constant pressure point is adjustable.

Applications

Auto boost water pressure for IC manufacture industries, industrial pressure boosting systems, motels, restaurants, gas stations, apartments, factories, schools, parks, gymnasiums, villas, railway station, building sites, etc.

EVERGUSH US-Series Inverter-controlled Constant Pressure Pump, Single Pump Operation. Auto booster water pressure for the place where the water pressure is insufficient.

EVERGUSH US-Series Inverter-controlled Constant Pressure Pump, Single Pump Operation. Installed on the top floor, connected to the water tower, and pressurized downwards (pressure constant) for the building

Operating Conditions

Ambient temperature: Max.40℃
Liquid temperature: 0~60℃ (If liquid temperature is over 60℃，we will change it to heatresistant mechanical seal and bearing)
Clean or potable water or no corrosive chemicals liquids without abrasives
Working pressure: Max. 10~20 bar.(Different pumps have different pressure resistant)

Specifications

Horsepower: 1/2HP~20HP(Above 20HP specification are available upon customer's special request)
Protection: IP54/IP55
Insulation: E,B,F
R.P.M.: 2P,4P
Voltage: 1 phase 110;220V*60HZ(Below 3HP); 3 phase 220/380/440/660*60HZ
1 phase 220~240V*50HZ(Below 3HP); 3 phase 380~415V*50HZ
Suction/Discharge: 1” ~10”
Head: Max. 260 M
Capacity: 3.5~240M³/hr.