• Water treatment processes
• Industrial cleaners and dishwashers
• Pressure boosting systems
• Heating and cooling for industrial processes
• Air-conditioning systems, Air freshening,heater devices.
• Water supply and boosting(drinking water with light chlorinated water)
• Fertilization systems
• Domestic and household use

Proper Installation way- Water level in Cistern is above the pump inlet end, Positive water pressure comes.

1. For clean, non-flammable and non-explosive liquid without solid granules and fibers;
2. Mineral water, soft water, pure water, edible vegetable oil and other light chemical mediums.
3. When the liquid density or viscosity is larger than normal water, it is necessary to select a motor withhigher power.
4. Whether a specific liquid is suitable for the pump, it all depends on many factors, among which the most important ones are chlorine content, PH value, temperature, solvent and oil content.

1. Liquid temperature: Standard type -15 °C~70 °C
   Hot water type :-15 °C~100 °C (Customized)
2. Ambient temperature: Max.40°C
3. Working pressure: Max. 10 bar.
4. Suitable for transport clean water, without solid particles or non-corrosive fluids.

1. Output: 0.5HP~5.5HP(0.37KW~4KW)
2. Motor Protection: IP55
3. Motor Insulation: F
4. IE2 High efficiency motor.(IE3 is available upon special request)
5. Pole: 2P
6. Voltage:
   1phase 110;220V*60Hz(below 3HP); 3phase 220/380*60Hz
   1phase 220~240V*50Hz(below 3HP); 3phase 380~415V*50Hz
7. Inlet/Outlet: 1"~2"
8. Max. Head: 76M
9. Max. Capacity: 550LPM