V-Series Auto Booster Pumps
-
V260AH
1/4HP -
V460AH
1/2HP -
V760AH
1HP -
For 1/4~1/2HP
With Protective Cover -
V760AH-8L(1HP)
Customization / With 8L Pressure Tank -
V260AH(1/4HP);V460AH(1/2HP)
From different angle view -
V260AH(1/4HP);V460AH(1/2HP)
From different angle view
FEATURES
- Auto boosting water pressure when water is consumed; Auto-stop when water is not consumed.
- Diaphragm pressure tank is one-piece forming, with long service time and no leakage.
- Equipped with motor overload protector and thermal cut-off device to prevent the motor from burning out due to abnormal conditions.
- A mechanical pressure switch controls the pressure used. The starting pressure is adjustable.
- Water-proof protective cover is optional if the pump is installed outdoors. It can avoid direct sun exposure and rain protection to increase service time.
WORKING CONDITIONS
- Ambient temperature: Max. 40℃
- Liquid temperature: 1~40℃
- Suction Head: Max. 6M
- Before using the pump, be sure the inlet pressure setting is lower than on setting of pressure switch.
- For clean liquids, without impurity or chemical matters.
SPEC SUMMARY
- Power: 1/4 HP~1HP (0.18KW~0.75KW)
- Motor: IP54 / Insulation E,B
Only single phase 1Phase 110V/220V (60Hz)
1Phase 220V~240V (50Hz)
Built in thermal overload protector - Max. Head: 45M
- Max. Capacity: 70LPM
- Pressure set : 1.0~ 3.2 bar. (Depending on model you choose)
- V460AH(1/2HP) and V760AH(1HP) use dual-voltage (110 / 220V) design for 60Hz model.