ESV CPU-Controlled Auto Booster Silent Pump
-
ESV200
1/4HP -
ESV400
1/2HP -
ESV800
1HP -
ESV
From different angle view -
ESV
From different angle view -
With Protective Cover
For All ESV Model
Features
- All-in-one booster pump unit, The ESV pump is mainly consisted of pump, motor, flow sensor, pressure tank and CPU board.
- Auto run and boost water pressure while water is consumed.Auto stop running while no water is consumed.
- Dry-running shutdown protection- To avoid motor burnout, ESV pump will shut down within 1 minute once dry running occurs.
- Built-in thermal protector can prevent pipeline burst due to abnormal frequent on/off.
- Low noise operation; Compact design for space saving.
- Always keep stable water pressure while using (hot) shower.
- If the pump is installed outdoors, it is recommended to install a protective cover on the ESV pump. It can protect the pump and electronic components from heavy rain, wind and direct sunburn, to extend product life.
Installation
Applications
- Auto boost water pressure to the house, apartment, villa,school, restaurant, school, beauty shop,...etc.
- Auto boost water pressure to garden sprinkler, heater,toilet, washing machine, sanitary equipment,...etc.
Working Conditions
- Ambient Temp.: Max.40℃.
- Liquid Temp.: 0~40℃.
- Relative humidity: Max.85%(RH).
- Working pressure: Max. 5 bar.
- Before starting the pump, make sure inlet pressure is lower than factory pre-set activation pressure.
- Suitable liquid: Drinking water or clean water without solid particles or non-corrosive fluid.
Specifications
- Power: 1/4HP;1/2HP ;1HP
- Motor Protection: IP54
- Motor Insulation: B
- Voltage: Single phase 110/220V*60Hz ; 220~240V*50Hz
- Inlet/Outlet: 3/4” or 1”
- Max.Head: 33M
- Max. Capacity: 95LPM