Skip to main content

ETH CPU-controlled Auto Booster Water Pump(Hot Water type)

  • ETH200
    1/4HP
  • ETH400
    1/2HP
  • ETH800
    1HP
  • ETH200/400/800
    With Protective Cover and Base
  • ETH200/400/800
    With Protective Cover
    ETH (Hot Water type) CPU-controlled Auto Booster Water Pump Brochure(50Hz)
    ETH (Hot Water type) CPU-controlled Auto Booster Water Pump Brochure(60Hz)

    FEATURES

    1. The pump casing structure is made of heat-resistant reinforced plastic steel, and the wetted parts are not rusty. The motor shaft also will not get stuck easily due to leave unused for a long time.
    2. Built-in microchip control. Automatic power off when no water is detected within 60 seconds, to avoid the motor being burnout.
    3. Dual-voltage 110 / 220V design(Only for 60Hz), you can manually adjust the required voltage.
    4. Low operation noise. The supply of water pressure is stable, and the water pressure will not change suddenly when taking a hot bath. The water temperature will not suddenly become cold or hot.
    5. All-in-one design, compact size saves installation space.
    6. If the pump is installed outdoors, it is recommended to install a protective cover on the ETH pump. It can protect the pump and electronic components from heavy rain, wind and direct sunburn, to extend product life.

    Production & Assembly Line of ET and ETH pump in EVERGUSH Headquarters,Kaohsiung Taiwan.  All ET and ETH pumps are 100% strictly inspected and tested.

    APPLICATIONS

    1. Auto boost water pressure to the house, apartment, villa,school, restaurant, school, beauty shop,...etc.
    2. Auto boost water pressure to garden sprinkler, heater,toilet, washing machine, sanitary equipment,...etc.
    3. Hot water pressure boosting from solar heater.

    The installation for ET and ETH pump are the same. The main difference is ETH can be used for <80℃ hot water. The ET pump can only use for <40℃ normal water.

    INSTALLATION

    Installed on the top floor of the building, it automatically pressurizes water downwards.

    Automatically pressurizes water downwards to supply users on high floors of the building

    Installed on the top floor of the building, it pressurizes water downwards to supply users on high floors.

    WORKING CONDITIONS

    1. Ambient Temp.: Max.45℃
    2. Liquid Temp.: 2~80℃.
    3. Relative humidity: Max.85%(RH).
    4. Working pressure: Max. 5 bar.
    5. Before starting the pump, make sure that the inlet water pressure cannot be greater than pre-set activation pressure from the factory.
    6. Applicable liquids: drinking water or other liquids that are not corrosive and have characteristics close to clean water.
    7. Not suitable for pumping groundwater or hot water which is over 80℃.

    SPECIFICATION

    1. Output: 1/4HP(180W);1/2HP(380W);1HP(750W)
    2. Motor Protection: IP54
    3. Motor Insulation: E class.
    4. Enclosed Fan-cooled 2P Induction Motor.Built-in Motor Overload Protector.
    5. Voltage: Single phase110/220V(Dual-voltage)*60Hz ; 220~240V*50Hz
    6. Inlet/Outlet: 3/4” or 1”
    7. Pre-set Activation Pressure: ETH200:1.2 bar.  ETH400: 1.6 bar. ETH800: 2.0 bar.
    8. Standard Performance for 50Hz Model: ETH200:15M*30LPM ; ETH400: 20M*36LPM ; ETH800: 24M*52LPM
    9. Standard Performance for 60Hz Model: ETH200:15M*30LPM ; ETH400: 20M*30LPM ; ETH800: 25M*40LPM

    Copyright@Asia Automatic Pump Co.,Ltd.All rights reserved.
    Powered by ASIA AUTOMATIC PUMP CO.,LTD.