Features:
- Adopting high efficiency motor which conforms to International IEC standards.
- Back-pull out design which allows the pump bearing frame and impeller to be backed out of the volute without disturbing the pump piping connections.
- It complies with international standard EN733(DIN24255) for interchangeability of components between all individual pump sizes
- It adopts high quality mechanical seal with better wear-resist effect.
- Pump casing and mechanical seal materials are replaceable for different characteristics of liquid.
- Adopting molded impeller, copper o-ring, stainless steel shaft and bearing in order to provide high quality products.
Applications:
- Water curculation for air conditioning equipment,such chillers and cooling towers.
- Broad range of industrial applications.
- Temporary water supply booster systems and fire fighting systems.
- Open loop and close loop water circuit systems.
- Paper mill, brewery, refinery, and boiler feed.
Installation :
Option 1: Negative Pressure- Water source is underneath the XA pump.
Option 2: Positive Pressure- Water source is higher than XA pump.
Operating Conditions:
- Ambient temperature: MAX.40℃
- Liquid temperature: 0~+100℃
- Max. pressure: 10 BAR.
- It is suitable for clean water or non chemical property liquid. It should contain no solid particles in the liquid.
Specifications:
- Output: 1HP~300HP
- Protection: IP54
- Insulation: E,B,F
- R.P.M: 2P,4P
- Voltage: 3 phase 220/380/440/660*60Hz
3 phase 380~415V*50Hz - Suction Dia.: 11/2” ~ 12”
- Discharge Dia.:11/4”~10”
- Head: MAX. 110M
- Capacity: MAX. 1200M³/ HR
- Working pressure: Max. 10bar
- Inverter(VFD) or Explosion-proof electric motor is available upon special request.