Skip to main content

EFD Submersible Dredge Pumps

  • 0.5HP
    Direct Type
  • 1HP
    Direct Type
  • 2~3HP
    Elbow Type (Detachable Elbow)
  • 5~7.5HP
    Elbow Type (Detachable Elbow)
    • Non-clog Vortex Impeller
      With SUS316 Agitator
    • EFD-A With Float Switch
      0.5~2HP Single Phase
    • TOS-EFD
      EFD Dredge Pump With Guide Rail Device


      Features

      1. Adopts Non-clog Vortex impeller equipped with powerful SUS316 agitator to create powerful stirring and pumping action for slurry and animal waste.It can minimize abrasive wear,allows large impeller clearance, and it's suitable for animal farms.
      2. Pump is equipped with motor overload protector.The motor will shut off automatically to prevent motor from burnout easily whenever voltage drop occurs, impeller plugged, and other unusual conditions.
      3. EFD adopts SIC dual Mechanical seal as standard, in order to overcome harsh environment or slurry wear.
      4. It's available to equip with auto float switch on submersible pump.
      5. Guide Rail device is available upon request. It's for safety purpose and easy dismantle.

      Structure

      • The EFD Sub. Dredge Pump uses Non-clog Vortex Impeller with SUS316 agitator.
      • It comes with a mechanical seal made of wear-resistant SIC (silicon carbide) material.

      Exploded View


      Applications

      1. Animal farms, Fishery, animal husbandry, dairy farm, piggery,fecal sewage tank.
      2. Dredging low concentration slurry water.
      3. Building waste water treatment system, sewage treatment plant, community market.
      4. Drainage waste water from industry and factory.
      5. Other sewage or sump treatment system.

      Operating Conditions

      1. Ambient Temperature: Max.40℃
      2. Liquid Temperature: 0~40℃
      3. Max. Depth: 10M
      4. Forbid 24 hours continuously running or running pumps under the lowest running water level.
      5. Solid Passage: 35~50MM

      Specifications

      1. Output: 1/2HP~7.5HP
      2. Motor Protection: IP68
      3. Insulation: F
      4. Pole: 2P
      5. Voltage:
        1phase 110 or 220V*60HZ(1/2HP~2HP)
        3phase 220~380V*60HZ
        1phase 220~240V*50HZ(1/2HP~2hp) 3phase380~415V*50HZ
      6. Discharge: 2” ~ 4”
      7. Max.Head: 26M
      8. Max. Capacity: 1300 LPM

      Diagram of Sub. Dredge Pump with float switch

      Dry-running or low water level running is forbidden for submersible dredge pump,It could cause damage on mechanical seal and motor coils. To avoid this situation, installer can connect float switch on control panel, to make sub.pump on & off automatically.Single phase sub. pump can be equipped with float switch directly on pump.

      A. Single Phase Submersible Pump(0.5~2HP)can be equipped with float switch on pump.

      • The float switch control automatically starts the pump at a high water level to drain and prevent sewage overflow. It stops at a low water level to avoid running the pump without water, which could cause the motor coils to overheat and get damaged.
      • EVERGUSH EFD submersible dredge pump is equipped with a float switch and is installed in the sewage well or wastewater pit to automatically drainage waste water.

      B. Connect Float switch on control panel, to run the pump automatically(For both 1 and 3 phase models).

      • You can choose a customized EVERGUSH control panel for EVERGUSH wastewater pumps. Panel is connected with some float switches to allow the pump system to automatically drain and shut down.You can choose a single pump to operate alone or two units (multiple units) to alternately operate in parallel. The outer box has a single door or double door(with window) choice, steel plate or stainless steel material, direct start or Y-delta start or Soft Starter control. EVERGUSH control panel is customized and designed to meet the on-site environment and regulatory requirements.

      Diagram of Submersible Sewage Pump with TOS Guide Rail Device

      • Through simple and convenient installation, we can connect the pump onto guide rail device. Whenever the pump needs maintenance, it can be easily pulled out through guide bar to dismantle, repair or examine the pump. Because wastewater pits or septic tanks could contain deadly biogas(methane) and the environment is always extremely harsh.For Life safety purpose, The workers no longer take big risks to go down the septic tank to do maintenance or replacement. It's safer and more convenient to do maintenance for the pump.
      • The length of the guide rail(bar) is determined according to site conditions. The installer can purchase guide bars at local hardware stores.

      Copyright@Asia Automatic Pump Co.,Ltd.All rights reserved.
      Powered by ASIA AUTOMATIC PUMP CO.,LTD.