1. Superior abrasion resistant double mechanical seal made of silicon carbide(SIC) to ensure best seal effect and reduce abrasion from slurry.
2. Equipped with agitator to create powerful stirring and pumping action for slurry. (Waste water containing below 10% slurry).
3. High efficiency 2P dry motor with overload protector,to protect motor from burnout when abnormal condition occurs.
4. Light-weight, portable, and easy installation and maintenance.
5. An additional float switch is available to make the pump run automatically.

1. Drainage slurry, waste water, sump from construction site, factory..etc.
2. Civil or tunnel engineering.
3. Drainage wastewater contained solid sediment or accumulated water.
4. Agriculture and irrigation.
5. Household waste water drainage.
6. Fish pond cleaning.
7. Temporary water circulation for garden landscape.
8. Waste water, sump pit and rain water drainage.

An additional float switch can be provided upon request. The main purpose of this float switch is to prevent pump from dry-running and avoid low water level operation.Dry-running or lower water level may cause the damage to the motor coils. Another advantage is to make the EFP pump run automatically. Automatic operation at high water level, and automatic stop at low water level. You don't always have to worry about the water level or plug in or unplug the pump.

1. Ambient Temp: Max.40℃
2. Liquid Temp: 0~40℃
3. Power: 1/2HP~1HP
4. Motor Protection: IP68
5. Motor Insulation: F class.
6. Motor Pole: 2P
7. Voltage: 1 phase or 3 phase /50Hz or 60Hz
8. Discharge: 2” or 3"
9. Head: Max.18.5M
10. Capacity: Max.380 LPM
11. Solid Passage: Max. 6MM
12. 24 Hours/per day continuously running is forbidden.
13. Liquids: Waste water or sump containing below 10% slurry. 
14. Can't be used in sea water.